//Body & Chassis
  • Out of stock
    THE HEAVY DUTY 4 PLUS BUMPER IS MADE OF 1/4" THICK STEEL PLATE AND FEATURES UPSWEPT ENDS FOR A BETTER APPROACH ANGLE AND CLEARANCE ON DIFFICULT TERRAIN. THE UPRIGHT SUPPORTS FOR THE GRILL/BRUSH GAURD SECTION ARE MADE OF 1/2" THICK STEEL WITH BUILT-IN REINFORCED SHACKLE MOUNING POINTS. THIS BUMPER IS ALSO SETUP FOR THE WARN 8274-50 STYLE WINCH. POWDER COATED BLACK.
  • Out of stock

    NEW AND RE-DESIGNED 4 BUMPER IS STILL THE HEAVIEST DUTY UNIT AVAILABLE. THE DEPARTURE ANGLE HAS BEEN INCREASED AND THE TOW BUMPER TIRE AND COOLER CARRIERS HAVE BEEN MOVED UP TO GAIN ADDED CLEARANCE. THE SWING AWAY TIRE COOLER CARRIER BUMPER FEATURES 3×1/2" THICK STEEL MOUNTING PLATES THAT ATTACH TO YOUR REAR FRAME CROSS-MEMBER FOR STRENGTH THAT IS UNEQUALED IN THE BUSINESS. NO PART OF THE UNIT ATTACHES TO YOUR BODY PANELS WHERE THEY CAN DAMAGE YOUR VEHICLE. PIVOTS ARE FULLY CNC MACHINED W/REPLACEABLE BRONZE BUSHINGS. TIRE CARRIER HAS BEEN MOVED UP TO MATCH THE COOLER CARRIER AND WILL EASILY HANDLE A 37" TIRE AND IS ADJUSTABLE FOR TIRE WIDTH. THE DETACHABLE RIGHT HAND SIDE CARRIER BASKET WILL EITHER CARRY A FULL SIZE COOLER OR 3 JERRY CANS AND FEATURES A BUILT-IN HI-LIFT JACK MOUNT. A KAYMAR CAMP LIGHT CAN BE ADDED. MOUNTING PLATES HAVE OPENINGS FOR ATTACHING “D” RINGS AND THE RECEIVER WILL HANDLE MORE TOW WEIGHT THAN YOUR FJ40 IS RATED FOR. RECEIVER HAS BUILT-IN CHAIN LOOPS FOR TOWING. CLOSES WITH A MACHINISTS LATCH. “D” RINGS, BALL MOUNT, CAMP LIGHT, NOT INCLUDED. MOUNTING H/W INCLUDED. BUMPER IS BLACK POWDER COATED. OEM TAIL LIGHTS CAN BE RETAINED WITH THIS BUMPER. STOP LED TAIL/BRAKE/RUNNING LIGHTS AND BRACKETS SOLD SEPARATELY.

    Weight: 185 lbs. Ship by Truck Freight only.
  • Out of stock
    THIS REPLACEMENT ALUMINUM BED WITH TAILGATE IS FOR THE FJ45 TOYOTA LAND CRUISER PICKUP. IT IS CONSTRUCTED FROM 5052 MARINE GRADE ALUMINUM ALLOY THAT IS 5/32" THICK. THE FLOOR HOWEVER IS MADE FROM THE SAME GRADE OF ALUMINUM ALLOY BUT IS 3/16" THICK. THE BOX COMES WITH THE ALUMINUM TAILGATE INSTALLED. YOUR STOCK TAILGATE WILL NOT FIT THIS BOX AND THIS TAILGATE WILL NOT FIT YOUR FACTORY STEEL BOX. THE TAILGATE IS NOT EMBOSSED WITH THE TOYOTA LOGO. THE BOX IS SHIPPED WITH AN ASSORTMENT OF STAINLESS STEEL HARDWARE FOR INSTALLATION. ***** EACH ALUMINUM BED MUST BE TRUCK SHIPPED. PLEASE CALL FOR A SHIPPING QUOTE *****
  • Out of stock
    THIS REPLACEMENT ALUMINUM BED IS FOR THE FJ45 TOYOTA LAND CRUISER PICKUP. IT DOES NOT COME WITH THE TAILGATE BUT ANY OF THE ALUMINUM TAILGATES OFFERED WILL FIT INCLUDING THE FACTORY STEEL TAILGATE. IT WILL NOT FIT ON 1963 OR 1964 MODELS. IT WILL FIT 1965 THRU 1967 MODELS ONLY. THE OVERAL BED LENGTH IS 68-1/4". IT IS CONSTRUCTED FROM 5052 MARINE GRADE ALUMINUM ALLOY THAT IS 5/32" THICK. THE FLOOR HOWEVER IS MADE FROM THE SAME GRADE OF ALUMINUM ALLOY BUT IS 3/16" THICK. THE BOX IS SHIPPED WITH AN ASSORTMENT OF STAINLESS STEEL HARDWARE FOR INSTALLATION. ***** EACH ALUMINUM BED MUST BE TRUCK SHIPPED. PLEASE CALL FOR A SHIPPING QUOTE *****
  • Out of stock
    THIS REPLACEMENT ALUMINUM BODY CAB FITS 1978 AND OLDER FJ45 TOYOTA LAND CRUISER PICKUPS BOTH SHORT AND LONG WHEELBASE VERSIONS. THIS CAB WILL NOT WORK WITH THE EARLY STYLE FJ45 TRUCKS THAT HAD THE NON-REMOVABLE STYLE HARDTOP. TRUCKS WITH THE NON-REMOVABLE HARDTOPS WERE PRODUCED PRIOR TO 1964 BUT SOME 1964 TRUCKS MAY STILL BE THE EARLIER VERSION. THIS CAB INCLUDES AN ALUMINUM TRANSMISSION TUNNEL WITH SHIFTER BOOTS, ALUMINUM CHECKER PLATE RUNNING BOARDS, AND AN ASSORTMENT OF STAINLESS STEEL HARDWARE FOR INSTALLATION. THE CAB ALSO HAS THE DROP OUT PROVIDED FOR THE FUEL TANK ALONG WITH THE EXTERIOR FUEL FILLER. IT IS CONSTRUCTED FROM 5052 MARINE GRADE ALUMINUM ALLOY THAT IS 5/32"(.156") THICK. ***** EACH BODY CAB MUST BE TRUCK SHIPPED. PLEASE CALL FOR A SHIPPING QUOTE *****
  • Out of stock
    THIS REPLACEMENT ALUMINUM BODY CAB FITS 1979 AND NEWER FJ45 TOYOTA LAND CRUISER PICKUPS. THIS CAB INCLUDES AN ALUMINUM TRANSMISSION TUNNEL COVER WITH SHIFTER BOOTS, ALUMINUM CHECKER PLATE RUNNING BOARDS, AND AN ASSORTMENT OF STAINLESS STEEL HARDWARE FOR INSTALLATION. THIS CAB DOES NOT HAVE THE GAS TANK STAP SUPPORT UNDERNEATH THE BODY. THE CAB ALSO PROVIDES THE FUEL TANK EXTERIOR FUEL FILLER . IT IS CONSTRUCTED FROM 5052 MARINE GRADE ALUMINUM ALLOY THAT IS 5/32"(.156") THICK. ***** EACH BODY CAB MUST BE TRUCK SHIPPED. PLEASE CALL FOR A SHIPPING QUOTE *****
  • Out of stock
    THIS REPLACEMENT ALUMINUM BODY COWL AND WINDSHIELD FRAME FITS 1978 AND OLDER FJ40,45 TOYOTA LAND CRUISERS. IT IS CONSTRUCTED FROM 5052 MARINE GRADE ALUMINUM ALLOY THAT IS 5/32"(.156") THICK. THIS REPLACEMENT COWL WILL NOT WORK WITH THE EARLY VERSION FJ45'S THAT CAME WITH A NON REMOVABLE HARDTOP, 1964 AND EARLIER. HOLES ARE CUT OUT FOR THE STOCK BRAKE MASTER, CLUTCH MASTER, SPEEDOMETER CABLE, MAIN ELECTRICAL GROMMET, AND STEERING COLUMN. THE STOCK HEATER BLOWER MOTOR AND HEATER HOSES ARE NOT CUT OUT. YOU WILL NEED TO USE THE STOCK WINDSHIELD FRAME HINGES, COWL VENT DOORS, AND GLOVE BOX LID. THE STOCK GAUGE CLUSTER IS MARKED BUT NOT CUT OUT. THE STOCK WINDSHIELD FRAME WILL NOT WORK WITH THE ALUMINUM COWL NOR WILL THE STOCK STEEL BODY TUB. THE STOCK WINDSHIELD GLASS WILL NOT WORK. YOUR OPTIONS ARE TO REPLACE THE GLASS ALL TOGETHER OR, SOME GLASS SHOPS MAY BE ABLE TO USE THE ORIGINAL GLASS AND JUST RE-SHAPE IT BY GRINDING DOWN THE EDGES. INCLUDED WITH THE COWL/WINDSHIELD FRAME IS A NEW WINDSHIELD MOUNTING GASKET AND A GOOD SELECTION OF STAINLESS STEEL HARDWARE. ***** EACH BODY COWL AND WINSHIELD FRAME ASSEMBLY MUST BE TRUCK SHIPPED. PLEASE CALL FOR A SHIPPING QUOTE *****
  • Out of stock
    THIS REPLACEMENT ALUMINUM BODY COWL AND WINDSHIELD FRAME FITS 1979 AND NEWER FJ40 TOYOTA LAND CRUISERS. IT IS CONSTRUCTED FROM 5052 MARINE GRADE ALUMINUM ALLOY THAT IS 5/32"(.156") THICK. HOLES ARE CUT OUT FOR THE STOCK BRAKE MASTER, CLUTCH MASTER, SPEEDOMETER CABLE, MAIN ELECTRICAL GROMMET, AND STEERING COLUMN. THE STOCK HEATER BLOWER MOTOR AND HEATER HOSES ARE NOT CUT OUT. YOU WILL NEED TO USE THE STOCK WINDSHIELD FRAME HINGES, COWL VENT DOORS, AND GLOVE BOX LID. THE STOCK GAUGE CLUSTER IS MARKED BUT NOT CUT OUT. THE STOCK WINDSHIELD FRAME WILL NOT WORK WITH THE ALUMINUM COWL NOR WILL THE STOCK STEEL BODY TUB. THE STOCK WINDSHIELD GLASS WILL NOT WORK. YOUR OPTIONS ARE TO REPLACE THE GLASS ALL TOGETHER OR, SOME GLASS SHOPS MAY BE ABLE TO USE THE ORIGINAL GLASS AND JUST RE-SHAPE IT BY GRINDING DOWN THE EDGES. INCLUDED WITH THE COWL/WINDSHIELD FRAME IS A NEW WINDSHIELD MOUNTING GASKET AND A GOOD SELECTION OF STAINLESS STEEL HARDWARE. ***** EACH BODY COWL AND WINSHIELD FRAME ASSEMBLY MUST BE TRUCK SHIPPED. PLEASE CALL FOR A SHIPPING QUOTE *****
  • Out of stock
    THIS REPLACEMENT ALUMINUM BODY TUB FITS 1978 AND OLDER FJ40 TOYOTA LAND CRUISERS. IT IS CONSTRUCTED FROM 5052 MARINE GRADE ALUMINUM ALLOY THAT IS 5/32"(.156") THICK. IT HAS BEEN DESIGNED TO WORK WITH THE FACTORY STEEL COWL. IT ALSO WORKS WITH THE FACTORY SIDE DOORS, REAR AMBULANCE DOORS, HARDTOP, SPARE TIRE CARRIER, AND SEATS. EACH TUB IS SHIPPED WITH A PAIR OF ALUMINUM RUNNING BOARDS, A TRANSMISSION TUNNEL WITH SHIFTER BOOTS, SILKAFLEX SEALANT, AN INSTALL DVD, RUBBER BODY MOUNTS, AND AN ASSORTMENT OF STAINLESS STEEL FASTENERS FOR INSTALLATION. THIS TUB IS FOR A 90" WHEEL BASE FJ40. ***** EACH BODY TUB MUST BE TRUCK SHIPPED. PLEASE CALL FOR A SHIPPING QUOTE *****
  • Out of stock
    THIS REPLACEMENT ALUMINUM BODY TUB FITS 1979 AND NEWER FJ40 TOYOTA LAND CRUISERS. IT IS CONSTRUCTED FROM 5052 MARINE GRADE ALUMINUM ALLOY THAT IS 5/32"(.156") THICK. IT HAS BEEN DESIGNED TO WORK WITH THE FACTORY STEEL COWL. IT ALSO WORKS WITH THE FACTORY SIDE DOORS, REAR AMBULANCE DOORS, HARDTOP, SPARE TIRE CARRIER, AND SEATS. EACH TUB IS SHIPPED WITH A PAIR OF ALUMINUM RUNNING BOARDS, A TRANSMISSION TUNNEL WITH SHIFTER BOOTS, SILKAFLEX SEALANT, AN INSTALL DVD, RUBBER BODY MOUNTS, AND AN ASSORTMENT OF STAINLESS STEEL FASTENERS FOR INSTALLATION. THIS TUB IS FOR A 90" WHEEL BASE FJ40. ***** EACH BODY TUB MUST BE TRUCK SHIPPED. PLEASE CALL FOR A SHIPPING QUOTE *****
  • Out of stock
    THIS FJ40 ALUMINUM STORAGE DROP BOX IS A WELD-IN ITEM AND IS USUALLY ADDED AS AN OPTION AT THE TIME A CUSTOMER ORDERS A REPLACEMENT TUB. THE PRICE INCLUDES THE DROP BOX ALONG WITH INSTALLATION LABOR. THIS STORAGE BOX CAN NOT BE WELDED TO A STOCK TUB BECAUSE OF DISSIMULAR METALS(ALUMINUM VS STEEL). THIS IS A LOCKABLE STORAGE SOLUTION THAT SITS FLUSH WITH THE REAR FLOOR AREA OF THE TUB AND MEASURES APPROXIMATELY 33" LONG X 16" WIDE X 10" DEEP. THIS BOX OCCUPIES THE AREA BORDERED BY THE FRAME RAILS, THE REAR BUMPER "C" CHANNEL AND THE TUBE THAT THE REAR SHOCKS ATTACH TO. THE STOCK EXHAUST WILL HAVE TO BE RE-LOCATED. **** SHIPPING IS INCLUDED WHEN A BODY TUB IS ORDERED ****
  • Out of stock
    OEM STYLE FRONT FENDERS ARE MADE FROM 1/8" ALUMINUM AND ARE MADE TO FIT BOTH THE FJ40 AND FJ45 MODEL LAND CRUISERS. THESE FENDERS ARE STOCK IN APPEARANCE BUT HAVE AN EXTRA 3-1/2" ADDED TO THE OVERALL WIDTH. THEY WORK WELL WITH LARGER WHEEL AND TIRE COMBINATIONS. EACH FENDER INCLUDES THE NECCESSARY BRACKETS WELDED IN PLACE FOR MOUNTING YOUR STOCK TURN SIGNAL ASSEMBLIES BUT THE MOUNTING HOLES ARE NOT DRILLED OUT. THIS ALLOWS THE CUSTOMER TO RUN THE STOCK ASSEMBLIES OR OPT FOR SOMETHING AFTER-MARKET WITHOUT HAVING TO DEAL WITH UNNECCESSARY HOLES. YOU WILL NOT NEED TO RE-USE ANY PARTS FROM YOUR OLD FENDERS. YOUR NEW FENDERS WILL HAVE A SERIES OF HOLES ON THE TOP SIDE WHICH WILL ATTACH TO THE BOTTOM OF YOUR HOOD SIDE PANELS. THERE ARE ALSO TWO HOLES ON THE BACK EDGE THAT WILL ATTACH TO YOUR COWL SECTION. ALL ALUMINUM FENDERS COME WITH AN INNER SKIRT. THE ORIGINAL STEEL FENDERS HAVE A BRACKET THAT GOES FROM THE FENDER INTO THE FRAME.THIS PIECE IS NOT INCLUDED WHEN RUNNING ALUMINUM FENDERS. SOME CUSTOMERS ARE ATTACHING AN ALUMINUM FLAT BAR FROM THE FENDER SKIRT TO THE FRAME FOR ADDED SUPPORT. **** SHIPPING IS A FLAT RATE $125 IN U.S. ****
  • Out of stock
    OEM STYLE FRONT FENDERS ARE MADE FROM 1/8" ALUMINUM AND ARE MADE TO FIT BOTH THE FJ40 AND FJ45 MODEL LAND CRUISERS. THE FENDERS HAVE THE NECCESSARY BRACKETS WELDED IN PLACE FOR MOUNTING YOUR STOCK TURN SIGNAL ASSEMBLIES BUT THE MOUNTING HOLES ARE NOT DRILLED OUT. THIS ALLOWS THE CUSTOMER TO RUN THE STOCK ASSEMBLIES OR OPT FOR SOMETHING AFTER-MARKET WITHOUT HAVING TO DEAL WITH UNNECCESSARY HOLES. YOU WILL NOT NEED TO RE-USE ANY PARTS FROM YOUR OLD FENDERS. YOUR NEW FENDERS WILL HAVE A SERIES OF HOLES ON THE TOP SIDE WHICH WILL ATTACH TO THE BOTTOM OF YOUR HOOD SIDE PANELS. THERE ARE ALSO TWO HOLES ON THE BACK EDGE THAT WILL ATTACH TO YOUR COWL SECTION. ALL ALUMINUM FENDERS COME WITH AN INNER SKIRT. THE ORIGINAL STEEL FENDERS HAVE A BRACKET THAT GOES FROM THE FENDER INTO THE FRAME.THIS PIECE IS NOT INCLUDED WHEN RUNNING ALUMINUM FENDERS. SOME CUSTOMERS ARE ATTACHING AN ALUMINUM FLAT BAR FROM THE FENDER SKIRT TO THE FRAME FOR ADDED SUPPORT. **** SHIPPING IS A FLAT RATE $125 IN U.S. ****
  • Out of stock
    OEM STYLE 3-PIECE FRONT FENDERS THAT REPLACE THE STOCK FENDERS HOOD SIDE PANELS. THEY ARE MOUNTED HIGHER ON THE BODY FOR ADDITIONAL TIRE CLEARANCE. THEY ARE MADE FROM 1/8" ALUMINUM AND ARE MADE TO FIT BOTH THE FJ40 AND FJ45 MODEL LAND CRUISERS. **** SHIPPING IS A FLAT RATE $125 IN U.S. ****
  • Out of stock
    THESE ALUMINUM HALF DOORS WILL FIT BOTH THE FJ40 AND FJ45 LAND CRUISERS. THESE HALF DOORS WILL WORK WITH THE STEEL BODY OR ONE OF THE ALUMINUM BODIES. IT WILL ALSO WORK WITH THE HARDTOP. WHEN RUNNING THESE DOORS WITH THE STOCK STEEL TUB YOU WILL UN-BOLT THE STOCK DOOR CATCH AGAINST THE "B" PILLAR AND INSTALL THE FORMED CATCH PROVIDED. WHEN RE-INSTALLING YOUR STOCK DOORS ALL THAT IS REQUIRED IS THE REMOVAL OF CATCH SO THAT THE STOCK CATCH BE BOLTED BACK INTO PLACE. THIS ALLOWS YOU TO EASILY CHANGE THE DOORS DEPENDING ON THE SEASON. THESE DOORS ARE SHIPPED WITH ALL THE NECCESSARY HARDWARE REQUIRED FOR INSTALLATION. ALSO INCLUDED ARE TWO LENGTHS OF ADHESIVE BACKED CLOSED CELL FOAM TAPE TO HELP SEAL THE DOORS AGAINST THE BODY WHEN IN THE CLOSED POSITION.
  • Out of stock
    THESE ALUMINUM HALF DOORS ARE MADE TO ACCEPT THE BESTOP SOFT UPPERS MADE FOR TOYOTA LAND CRUISERS. THESE HALF DOORS WILL WORK WITH THE STEEL BODY OR ONE OF THE ALUMINUM BODIES. WHEN RUNNING THESE DOORS WITH THE STOCK STEEL TUB YOU WILL UN-BOLT THE STOCK DOOR CATCH AGAINST THE "B" PILLAR AND INSTALL THE FORMED CATCH PROVIDED. WHEN RE-INSTALLING YOUR STOCK DOORS ALL THAT IS REQUIRED IS THE REMOVAL OF CATCH SO THAT THE STOCK CATCH BE BOLTED BACK INTO PLACE. THIS ALLOWS YOU TO EASILY CHANGE THE DOORS DEPENDING ON THE SEASON. THESE DOORS ARE SHIPPED WITH ALL THE NECCESSARY HARDWARE REQUIRED FOR INSTALLATION. ALSO INCLUDED ARE TWO LENGTHS OF ADHESIVE BACKED CLOSED CELL FOAM TAPE TO HELP SEAL THE DOORS AGAINST THE BODY WHEN IN THE CLOSED POSITION. SOFT UPPERS ARE NOT INCLUDED.