/40 Series
  • If you are planning on changing over to rear disc brakes on your E-7/80 Land Cruiser, we have got the ultimate kit for you. The highest quality components, 4 Plus mounting brackets, DBA cross drilled/slotted/anodized/ventilated rotors, MAF D.O.T. steel braided brake lines, grade 8 mounting hardware, and top quality rebuilt GM calipers with pads. Our stainless steel braided brake lines attach directly to your OEM brake lines, and to the GM calipers. (58 – 7/70 REQUIRE NEW 10MM FITTING TO BE FIT ONTO FACTORY HARD LINE) Our DBA rear conversion rotors are the highest quality units available, and are manufactured specifically for this conversion. Our 4 plus rear disc brake conversion brackets are the highest quality units available. Best of all, although our kit has components of a quality level unmatched by our competitors, it costs no more than the generic kits on the market. Why pay more, and get less? Installation of this kit requires a fair degree of mechanical skill. We offer an optional Wilwood adjustable proportioning valve for those who wish to tune their brake system. Sold as a complete kit. Semi-floaters only
  • Out of stock
    THE HEAVY DUTY 4 PLUS BUMPER IS MADE OF 1/4" THICK STEEL PLATE AND FEATURES UPSWEPT ENDS FOR A BETTER APPROACH ANGLE AND CLEARANCE ON DIFFICULT TERRAIN. THE UPRIGHT SUPPORTS FOR THE GRILL/BRUSH GAURD SECTION ARE MADE OF 1/2" THICK STEEL WITH BUILT-IN REINFORCED SHACKLE MOUNING POINTS. THIS BUMPER IS ALSO SETUP FOR THE WARN 8274-50 STYLE WINCH. POWDER COATED BLACK.
  • REAR HEAVY DUTY TAIL LIGHT GUARDS 73 - 84 FJ40 FJ45 POWDER COATED BLACK. THESE GUARDS ARE MADE FROM HEAVY DUTY 1/4" THICK STEEL AND POWDER COATED BLACK FOR A LASTING DURABLE FINISH. SOLD AS A PAIR.

  • Out of stock

    THE GM NV4500 ADAPTER TO THE LAND CRUISER 19-SPLINE TOYOTA LAND CRUISER TRANSFER CASE IS 5.875" IN LENGTH. THE OVERALL LENGTH OF THE TRANSMISSION AND ADAPTER IS 18.250". ADAPTER MATERIAL IS 356-T6 HEAT TREATED ALUMINUM ALLOY. THE ADAPTER ALSO HAS A PROVISON FOR A HEAVY DUTY TRANSMISSION MOUNT IF NEEDED. THE ADAPTER KIT INCLUDES ADAPTER HOUSING, 19-SPLINE SPUD SHAFT WITH 31 SPLINE INTERNAL, SEALED BEARING, SET COLLAR, GASKET, NYLON NUT, FASTENING HARDWARE, AND DETAILED INSTRUCTIONS. FITS 1981-1990 FJ40 FJ60 FJ62 LAND CRUISER TRANSFER CASES.

  • Out of stock

    THIS DUAL DIAPHRAGM 8.5" BOOSTER / MASTER COMBO SYSTEM WAS DESIGNED FOR FRONT AND REAR DISC BRAKE CONVERSIONS. EACH KIT INCLUDES A 1-1/8" DIAMETER BORE MASTER, PROPORTIONING VALVE, PROPORTIONING VALVE TO MASTER STEEL TUBING, NEW BRAKE LINE FITTINGS, AND PROPORTIONING VALVE MOUNTING BRACKET. BRAKE LINE MODIFICATIONS ARE REQUIRED. MOUNTS TO YOUR EXISTING FIREWALL WITHOUT MODIFICATIONS OR EXTENSIONS ON LAND CRUISERS THAT HAD THE SMALLER OEM BOOSTER ON THEM (FITS 1971-1983). WITH FIREWALL MODIFICATIONS THIS BOOSTER WILL WORK ON EARLIER MODELS AS WELL.

    (NO CORE CHARGE REQUIRED)

  • THIS STAINLESS STEEL BRAKE LINE KIT FITS ON THE REAR AXLE OF FJ40,55 TOYOTA LAND CRUISERS AFTER THE REAR DISC BRAKE KIT HAS BEEN INSTALLED USING GM STYLE CALIPERS. OFF-ROAD USE ONLY
  • Out of stock

    NEW AND RE-DESIGNED 4 BUMPER IS STILL THE HEAVIEST DUTY UNIT AVAILABLE. THE DEPARTURE ANGLE HAS BEEN INCREASED AND THE TOW BUMPER TIRE AND COOLER CARRIERS HAVE BEEN MOVED UP TO GAIN ADDED CLEARANCE. THE SWING AWAY TIRE COOLER CARRIER BUMPER FEATURES 3×1/2" THICK STEEL MOUNTING PLATES THAT ATTACH TO YOUR REAR FRAME CROSS-MEMBER FOR STRENGTH THAT IS UNEQUALED IN THE BUSINESS. NO PART OF THE UNIT ATTACHES TO YOUR BODY PANELS WHERE THEY CAN DAMAGE YOUR VEHICLE. PIVOTS ARE FULLY CNC MACHINED W/REPLACEABLE BRONZE BUSHINGS. TIRE CARRIER HAS BEEN MOVED UP TO MATCH THE COOLER CARRIER AND WILL EASILY HANDLE A 37" TIRE AND IS ADJUSTABLE FOR TIRE WIDTH. THE DETACHABLE RIGHT HAND SIDE CARRIER BASKET WILL EITHER CARRY A FULL SIZE COOLER OR 3 JERRY CANS AND FEATURES A BUILT-IN HI-LIFT JACK MOUNT. A KAYMAR CAMP LIGHT CAN BE ADDED. MOUNTING PLATES HAVE OPENINGS FOR ATTACHING “D” RINGS AND THE RECEIVER WILL HANDLE MORE TOW WEIGHT THAN YOUR FJ40 IS RATED FOR. RECEIVER HAS BUILT-IN CHAIN LOOPS FOR TOWING. CLOSES WITH A MACHINISTS LATCH. “D” RINGS, BALL MOUNT, CAMP LIGHT, NOT INCLUDED. MOUNTING H/W INCLUDED. BUMPER IS BLACK POWDER COATED. OEM TAIL LIGHTS CAN BE RETAINED WITH THIS BUMPER. STOP LED TAIL/BRAKE/RUNNING LIGHTS AND BRACKETS SOLD SEPARATELY.

    Weight: 185 lbs. Ship by Truck Freight only.
  • Out of stock
    THE GM 4L60E-2WD ADAPTER TO THE TOYOTA LAND CRUISER TRANSFER CASE IS 6.750" IN LENGTH. THE OVERALL LENGTH OF THE TRANSMISSION AND ADAPTER IS 30.50". THE ADAPTER MATERIAL IS 356-T6 HEAT TREATED ALUMINUM ALLOY. THE ADAPTER KIT INCLUDES AND ADAPTER HOUSING, SPUD SHAFT W/10-SPLINE, GM VSS SENSOR, T-CASE SHIFTER BRACKET, RETAINER, SEALED BEARING, GASKET, NYLON LOCK NUT, FASTENING HARDWARE, AND DETAILED INSTRUCTIONS. FITS 1963-73 FJ40,55 TOYOTA LAND CRUISERS. ADAPTER KIT IS DESIGNED FOR EXCLUSIVE USE WITH THE 4L60E-2WD TRANSMISSIONS WITH A 4-BOLT NON-REMOVABLE BELL-HOUSING.
  • Out of stock
    THE GM 4L60E-2WD ADAPTER TO THE TOYOTA LAND CRUISER TRANSFER CASE IS 6.750" IN LENGTH. THE OVERALL LENGTH OF THE TRANSMISSION AND ADAPTER IS 30.50". THE ADAPTER MATERIAL IS 356-T6 HEAT TREATED ALUMINUM ALLOY. THE ADAPTER KIT INCLUDES AN ADAPTER HOUSING, SPUD SHAFT W/16-SPLINE, GM VSS SENSOR, T-CASE SHIFTER BRACKET, REATAINER, SEALED BEARING, GASKET, NYLON LOCK NUT, FASTENING HARDWARE, AND DETAILED INSTRUCTIONS. FITS 1974-7/80 FJ40,55 TOYOTA LAND CRUISERS. ADAPTER KIT IS DESIGNED FOR EXCLUSIVE USE WITH THE 1993-96 4L60E-2WD TRANSMISSIONS WITH A 4-BOLT NON RE-MOVABLE BELL-HOUSING.
  • THE GM 4L60E-2WD ADAPTER TO THE TOYOTA LAND CRUISER TRANSFER CASE LENGTH IS 8.250" IN LENGTH. THE OVERALL LENGTH OF THE TRANSMISSION AND ADAPTER IS 30.50". THE ADAPTER MATERIAL IS 356-T6 HEAT TREATED ALUMINUM ALLOY. THE ADAPTER KIT INCLUDES A 2-PIECE ADAPTER HOUSING, SPUD SHAFT W/16-SPLINE, GM VSS SENSOR, T-CASE SHIFTER BRACKET, RETAINER, SEALED BEARING, GASKET, NYLON LOCK NUT, FASTENING HARDWARE, AND DETAILED INSTRUCTIONS. FITS 1974-7/80 FJ40,55 TOYOTA LAND CRUISERS. ADAPTER KIT IS DESIGNED FOR EXCLUSIVE USE WITH THE 1997 AND UP 4L60E-2WD TRANSMISSIONS WITH A 6-BOLT REMOVABLE BELL-HOUSING.
  • Out of stock
    THE GM 4L60E-2WD ADAPTER TO THE TOYOTA LAND CRUISER TRANSFER CASE IS 8.250" IN LENGTH. THE OVERALL LENGTH OF THE TRANSMISSION AND ADAPTER IS 30.50". THE ADAPTER MATERIAL IS 356-T6 HEAT TREATED ALUMINUM ALLOY. THE ADAPTER KIT INCLUDES A 2-PIECE ADAPTER HOUSING, SPUD SHAFT W/19-SPLINE, GM VSS SENSOR, T-CASE SHIFTER BRACKET, T-CASE SHIFTER BRACKET SPACERS, SNAP RINGS, RETAINER, SEALED BEARING, GASKET, NYLON LOCK NUT, FASTENING HARDWARE, AND DETAILED INSTRUCTIONS. FITS 8/80-1989 FJ40,60,62 TOYOTA LAND CRUISERS. ADAPTER KIT IS DESIGNED FOR EXCLUSIVE USE WITH THE 1997 AND UP 4L60E-2WD TRANSMISSIONS WITH A 6-BOLT REMOVABLE BELL-HOUSING.
  • Out of stock
    THE 700R4-2WD ADAPTER TO THE LAND CRUISER 10-SPLINE TRANSFER CASE IS 6.75" IN LENGTH. THE OVERALL LENGTH OF THE TRANSMISSION AND ADPTER IS 30.125". ADAPTER MATERIAL IS 356-T6 HEAT TREATED ALUMINMUM ALLOY. THE ADAPTER KIT INCLUDES AN ADAPTER HOUSING, 10-SPLINE SPUD SHAFT, NEW 700R4 OUTPUT SHAFT, SEALED BEARING, GASKETS, FASTENING HARDWARE, AND DETAILED INSTRUCTIONS. FITS FJ40,55 TOYOTA LAND CRUISER TRANSFER CASES 1963-1973. BTB#30-3110 CAN BE USED FOR THE REAR CROSS-MEMBER SUPPORT. IT IS ALSO RECOMMENDED THAT THE TRANSFER CASE FRONT OUTPUT FLANGE BE UP-GRADED. SEE BTB#30-3185 OR #30-3152 FOR MORE DETAILS.
  • Out of stock
    THE 700R4-2WD ADAPTER TO THE LAND CRUISER 16-SPLINE TRANSFER CASE IS 6.75" IN LENGTH. THE OVERALL LENGTH OF THE TRANSMISSION AND ADAPTER IS 30.125". ADAPTER MATERIAL IS 356-T6 HEAT TREATED ALUMINUM ALLOY. THE ADAPTER KIT INCLUDES AND ADAPTER HOUSING, 16-SPLINE SPUD SHAFT, NEW 700R4 OUTPUT SHAFT, TRANSFER CASE SHIFTER BRACKET, SEALED BEARING, GASKETS, FASTENING HARDWARE, AND DETAILED INSTRUCTIONS. FITS FJ40,55 TOYOTA LAND CRUISER TRANSFER CASES 1974-1980. BTB#30-3110 CAN BE USED FOR THE REAR CROSS-MEMBER SUPPORT. FOR 1979-7/80 FJ40'S USE REAR TRUSS MOUNT BTB#30-3230. IT IS ALSO RECOMMENDED THAT THE TRANSFER CASE FRONT OUTPUT FLANGE BE UP-GRADED. SEE BTB#30-3185 OR #30-3152 FOR DETAILS.
  • Out of stock
    THE GM 700R4-2WD ADAPTER TO THE LAND CRUISER 19-SPLINE TRANSFER CASE IS 6.750" IN LENGTH. THE OVERALL LENGTH OF THE TRANSMISSION AND ADAPTER IS 30.125" ADAPTER MATERIAL IS 356-T6 HEAT TREATED ALUMINUM ALLOY. THE ADAPTER KIT INCLUDES AN ADAPTER HOUSING, 19-SPLINE SPUD SHAFT, NEW 700R4 OUTPUT SHAFT, TRANSFER CASE SHIFTER BRACKET, TRANSFER CASE BRACKET SPACERS, TRANSFER CASE INPUT SEAL, SEALED BEARING, GASKETS, FASTENING HARDWARE, AND DETAILED INSTRUCTIONS. FIT FJ40,60,62 TOYOTA LAND CRUISER TRANSFER CASES 1981-1989. RECOMMEND BTB#30-3219 FOR REAR CROSS-MEMBER SUPPORT MOUNT.
  • Out of stock
    THE GM NV4500 ADAPTER TO THE LAND CRUISER 10-SPLINE TRANSFER CASE IS 5.875" IN LENGTH. THE OVERALL LENGTH OF THE TRANSMISSION AND ADAPTER IS 18.250". ADAPTER MATERIAL IS 356-T6 HEAT TREATED ALUMINUM ALLOY. THE ADAPTER KIT INCLUDES ADAPTER HOUSING, 10-SPLINE SPUD SHAFT W/31 SPLINE INTERNAL, SEALED BEARING, SET COLLAR, GASKET, NYLON NUT, FASTENING HARDWARE, AND DETAILED INSTRUCTIONS. FITS FJ40,55 TOYOTA LAND CRUISER TRANSFER CASES 1963-1973. BTB#30-3110 CAN BE USED FOR THE REAR CROSS-MEMBER SUPPORT.
  • Out of stock
    THE GM NV4500 ADAPTER TO THE LAND CRUISER 16-SPLINE TRANSFER CASE IS 5.875" IN LENGTH. THE OVERALL LENGTH OF THE TRANSMISSION AND ADAPTER IS 18.250". ADAPTER MATERIAL IS 356-T6 HEAT TREATED ALUMINUM ALLOY. THE ADAPTER KIT INCLUDES AN ADAPTER HOUSING, 16-SPLINE SPUD SHAFT W/31 SPLINE INTERNAL, TRANSFER CASE LINKAGE BRACKET, SEALED BEARING, SET COLLAR, GASKET, NYLON NUT, FASTENING HARDWARE, AND DETAILED INSTRUCTIONS. FITS FJ40,55 TOYOTA LAND CRUISER TRANSFER CASES 1974-1980. BTB#30-3110 CAN BE USED FOR THE REAR CROSS-MEMBER SUPPORT.